RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
To set up the name of the Scanning task
Press Name, and the input interface shown below.
Figure 2- 70
Position the cursor at the appropriate field to edit.
Press Del, delete the letter on which the cursor sits.
Figure 2- 71
Press Done after the name entered for the Scanning task.
Figure 2- 72
To set up the Scanning task
Press Task, enter the main interface to set up the scanning task.
Figure 2- 73
Press Add, setting one of the entry in the scanning task.
To Next Page
Loading...
