RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
c) Press Unit ℃, select the unit of the sensor: ℃.
Figure 3- 20
When finish a proper input, press to save all the changes and back to a higher
level menu.
(3). Press Define button, the interface shows below:
Figure 3- 21
(4). Press Add button, input the first group of reference value: 111.480Ω,
29.5℃.
(5). In Define interface, Press SEG Arith Line, Select the arithmetic: Line.
Figure 3- 22
When finishing this group of reference value, press Done button, save all changes,
and continue to input other values.
To Next Page
Loading...
