RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
Figure 1- 39
Press Name button, create a name for the sensor reference name.
Figure 1- 40
Press Done button to finish the input work.
Press Type button, to select the sensor type, include: DC voltage，DC current，2-wire,
4-wire resistance and frequency.
Figure 1- 41
Press button back to the higher level menu.
Press Unit button, to select the physical unit, include: ℃, Pa, %, °, and F.
Figure 1- 42
Press button back to the higher level menu.
In New interface, press Define button to build the reference table.
Figure 1- 43
To Next Page
Loading...
