RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
Basic measurement:
1. Connect test leads shown in Figure 2- 6; red test leads to the HI Terminal, black
test leads to the LO Terminal.
2. Press to select the DC Voltage measurement function.
3. Choose the appropriate measurement range.
4. Set up the DC Ratio Measurement.
Press Ratio On, to start the DC Ratio Measurement.
5. Lead test leads into circuit, start to measure.
Figure 2- 6 Ratio Measurement
To Next Page
Loading...
