Rigol DM3061 - Page 71

RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
2-21
Reading Hold
The reading hold mode captures and holds a reading on the front panel display when
a stable reading is detected. The system Hold ranges are 0.01%, 0.1%, 1%, and
10%.
Press  Auto  Hold, the display shows:
Figure 2- 20
Table 2- 17 Reading Hold Function Menu Description
Function
Menu
Description
On/Off
Turn on/off the reading hold function.
0.01％
Set the hold scope is 0.01％.
0.1％
Set the hold scope is 0.1％.
1%
Set the hold scope is 1％.
10%
Set the hold scope is 10％.
Save all changes, back to a higher level menu.