RIGOL DM3000-Series Digital Multimeter is a equipment designed for
high-precision, multifunction, automation measurements. The series includes 6½
digits multimeter, with high-speed data acquisition, automatic measurements,
multiplexer, mathematical operations, and flexible user sensor configurations etc.
Interface includes RS-232, USB, LAN, GPIB for disk storage and print.
The DM3000 has a high-resolution monochrome LCD display system for simple
waveform display and recording. The concise and user-friendly layout of the front
panel has a keyboard, and back lighted functional buttons, embedded with
operating instructions makes the instrument more flexible, and capable. The
50kSa/s high data sampling rate allows to capture precision audio waveforms and
high speed data. It has 2Mbyte of internal memory depth while the external
memory depth is expandable as preferred. The AC voltage and current
measurement is true RMS. It supports virtual terminal display and control, and
remote network access.
With the performance and characteristics given below, you will understand how a
DM3000 can satisfy your measurement requirements.
50kSa/s data sampling rate can be used, such as the rapidly changing
high-precision audio waveform data. Meanwhile waveform can be displayed
on LCD Screen
Resolving Index: > 6½ digits and 2,400,000 Count
24 measurement functions
DC voltage and current, AC voltage and current, two-wire and four-wire
resistance, capacitance, continuity test, diode test, frequency, cycle,
ratio measurements, sensor measurement, and so on.
Upper limit and lower limit on threshold measurement
Arithmetic include: maximum, minimum, limit, average, dBm, dB
Data acquisition functions include : data records, inspection, automatic
measurement.
True RMS AC voltage and current measurement
16-Channels inspection functional measurement and control software
(optional)
DC voltage >10GΩ input impedance to achieve the range of 48V (± 24V)
10 groups measuring set-up storage and unlimited setup through PC
interface