Rigol DM3061

RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
2-33
Set Up the I/O System
Press  I/O, the display shows:
Figure 2- 34
Table 2- 23 I/O Setting Function Menu Description
Function
Menu
Description
LAN
Set up LAN interface.
GPIB
Set up GPIB I/O interface.
USB
Check USB interface ID.
RS232
Set up RS-232 I/O interface.
Save all changes, back to a higher level menu.
Operation introduction:
Remote control through LAN, GPIB (IEEE-488), USB and RS-232 interface can be
configured. The I/O interface of GPIB, USB and RS-232 only one could be used at the
same time.