Rigol DP831A User Manual

Chapter 2 Front Panel Operations RIGOL
DP800 User’s Guide 2-59
2. Press Utility  System  Track Set  On/Off to select "Enable" or
"Disable".
 Disable: do not track the output status of the channel.
 Enable: track the output status of the channel.
System Information
Press Utility  Sys Info to view the system information of the instrument,
including the model, serial number and digital board version.
System Language
DP800 supports menus in various languages and provides Chinese/English help
information, prompt messages and interface display. Press Utility  Language to
select the desired language.
Test/Calibration
You can view the calibration information of the instrument and calibrate the
instrument.
1. Press Utility  Test/Cal to view the calibration state, calibration time and test
information (include the top board, bottom board, fan and temperature) of the
instrument.
2. Press Utility  Test/Cal  ManualCal and input the correct password to
enter the manual calibration interface. At this point, you can perform calibration
on the instrument.
A default password is assigned to the instrument when it left factory. To acquire
the password, please contact RIGOL. If you already know the password, you
can modify the password (press Utility  Test/Cal  Password and modify
the password according to the interface prompts).
Note
The recommended calibration interval
is 1 year. The instrument is calibrated before
leaving factory. Calibration by users themselves is not recommended and if
calibration is required, please contact
RIGOL
.

Rigol DP831A Specifications

General

Brand	Rigol
Model	DP831A
Category	Power Supply
Language	English