Rigol DS1000B Series

RIGOL Command Systems
Programming Guide for DS1000B Series
2-88
30. :KEY:Trig%50
Command Format:
:KEY:Trig%50
Function:
This command sets the trigger level at the vertical midpoint of the amplitude of
trigger signal.
31. :KEY:FUNC_Z
Command Format:
:KEY:FUNC_Z
Function:
The command selects the multifunction knob.
32. :KEY:FUNC_INC
Command Format:
:KEY:FUNC_INC
Function:
The command increases the offset of multifunction knob.
33. :KEY:FUNC_DEC
Command Format:
:KEY:FUNC_DEC
Function:
The command decreases the offset of multifunction knob.
34. :KEY:CH1_VOLT_INC
Command Format: