Rigol DS1000B Series

Command Systems RIGOL
Programming Guide for DS1000B Series
2-57
MEASure Commands
MEASure Commands are used for the fundamental measurement operations, and the
measurement results are expressed by scientific notation.
MEASure Commands include:
 :MEASure:CLEar  :MEASure:PWIDth?
 :MEASure:VPP?  :MEASure:NWIDth?
 :MEASure:VMAX?  :MEASure:PDUTycycle?
 :MEASure:VMIN?  :MEASure:NDUTycycle?
 :MEASure:VAMPlitude?  :MEASure:PDELay?
 :MEASure:VTOP?  :MEASure:NDELay?
 :MEASure:VBASe?  :MEASure:PPHAse?
 :MEASure:VAVerage?  :MEASure:NPHAse?
 :MEASure:VRMS?  :MEASure:TOTal
 :MEASure:OVERshoot?  :MEASure:SOURce
 :MEASure:PREShoot?  :MEASure:DELAySOURce
 :MEASure:FREQuency?  :MEASure:PHAseSOURce
 :MEASure:RISetime?  :MEASure:ENABle
 :MEASure:FALLtime?  :MEASure:DISable
 :MEASure:PERiod?  :MEASure?
We will give detailed introductions for each command in the following parts.