Rigol DS1000B Series

Command Systems RIGOL
Programming Guide for DS1000B Series
2-21
TIMebase Commands
TIMebase Commands are used to set horizontal scale and horizontal offset. Changing
horizontal scale makes the waveform enlarge or shrink; and changing horizontal
position will lead the waveform offset relative to center screen.
TIMebase Commands include:
 :TIMebase:MODE
 :TIMebase[:MAIN]:OFFSet
 :TIMebase:DELayed:OFFSet
 :TIMebase[:MAIN]:SCALe
 :TIMebase:DELayed:SCALe
 :TIMebase:FORMat
We will give detailed introductions for each command in the following parts.