Rigol DS1000B Series

Command Systems RIGOL
Programming Guide for DS1000B Series
2-97
SAVe/RECall Commands
SAVe/RECall Commands are used to save and recall the waveform data and image on
the screen.
SAVe/RECall Commands include:
 :SAVERECALL:TYPE
 :SAVERECALL:LOCation
 :SAVERECALL:LOAD
 :SAVERECALL:SAVe
 :SAVe:IMAGe:STARt
 :SAVe:IMAGe:FACTors
 :SAVe:IMAGe:FORMat
 :SAVe:WAVeform:STARt
 :SAVe:SETup:STARt
 :SAVe:CSV:STARt
 :RECall:WAVeform:STARt
 :RECall:SETup:STARt
We will give detailed introductions for each command in the following parts.