Rigol DS1000B Series Programming Guide

RIGOL Command Systems
Programming Guide for DS1000B Series
2-100
Returned Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Example:
:SAVE:IMAG:FACT ON Save the system parameters.
:SAVE:IMAG:FACT? Return 1.
7. :SAVe:IMAGe:FORMat
Command Format:
:SAVE:IMAGe:FORMat <format>
:SAVE:IMAGe:FORMat?
Function:
The command sets the format of saved image. The <format> may be 24bit real
color (BMP|BMP24bit), 8bit bitmap (BMP8bit) or PNG (PNG).
Returned Format:
The query returns BMP24bit, BMP8bit or PNG.
Example:
:SAVE:IMAG:FORM BMP Set the format as 24 bit real color.
:SAVE:IMAG:FORM? Return BMP24bit.
8. :SAVe:WAVeform:STARt
Command Format:
:SAVE:WAVeform:STARt <file_spec>
Function:
The command starts the saving waveform function. If the waveforms are in
internal flash, the <file_spec> is composed of integers among 0~9; if in
external storage medium, the <file_spec> will be the file name, which is
composed of double quotation marks and ASCII characters, also, the file name
length within the double quotation marks must less than 26 characters.
NOTE: The system will add the file format suffix with 4 characters automatically, which are
not included in 26 characters.

Rigol DS1000B Series Specifications

General

Brand	Rigol
Model	DS1000B Series
Category	Test Equipment
Language	English