RIGOL Command Systems
Programming Guide for DS1000B Series
Example:
:CHAN2:VERN ON Set the fine adjustment function of channel 2 on.
:CHAN2:VERN? Return 1.
11. :CHANnel<n>:UNITs
Command Format:
:CHANnel<n>:UNITs <units>
:CHANnel<n>:UNITs?
Function:
The command sets the unit as VOLTs (V), AMPeres (A), WATTs (W) or UNKNown.
The <n> may be 1, 2, 3 or 4.
Returned Format:
The query returns VOLTs or AMPeres, WATTs, UNKNown.
Example:
:CHAN1:UNIT VOLT Set the unit of channel 1 as V.
:CHAN1:UNIT? Return VOLTs.
To Next Page
Loading...
