RIGOL Command Systems
Programming Guide for DS1000B Series
1. :MASK:CREate
Command Format:
:MASK:CREate
Function:
The command creates the rule of passing test.
2. :MASK:ENABle
Command Format:
:MASK:ENABle {{1|ON}|{0|OFF}}
:MASK:ENABle?
Function:
The command sets the state of passing test as ON or OFF.
Returned Format:
The query returns 1 or 0, respectively indicates ON or OFF.
Example:
:MASK:ENAB ON Set passing test on.
:MASK:ENAB? Return 1.
3. :MASK:X
Command Format:
:MASK:X <x>
:MASK:X?
Function:
The command sets the rule of testing X direction. The <x> is 0.04div~4div.
Returned Format:
The query returns the x value, and the unit is div.
Example:
To Next Page
Loading...
