Rigol DS1000B Series Programming Guide

RIGOL Command Systems
Programming Guide for DS1000B Series
2-106
6. :MASK:OPERate
Command Format:
:MASK:OPERate <opt>
:MASK:OPERate?
Function:
The command sets the function of passing test run or stop. The <opt> may be
RUN or STOP.
Returned Format:
The query returns RUN or STOP.
Example:
:MASK:OPER RUN Set the operation of passing test run.
:MASK:OPER? Return RUN.
7. :MASK:OUTPut
Command Format:
:MASK:OUTPut <output>
:MASK:OUTPut?
Function:
The command sets the output mode of passing test. The <output> may be FAIL,
PASS, FAIL_SOUND or PASS_SOUND.
NOTE: PASS SOUND is effective when sound setting is on.
Returned Format:
The query returns FAIL or PASS, FAIL_SOUND, PASS_SOUND.
Example:
:MASK:OUTP PASS Set the output mode of passing test as pass.
:MASK:OUTP? Return PASS.
8. :MASK:STOPonoutput

Rigol DS1000B Series Specifications

General

Brand	Rigol
Model	DS1000B Series
Category	Test Equipment
Language	English