Command Systems RIGOL
Programming Guide for DS1000B Series
System Error Code
Up to 10 errors can be recorded in the system error queue. If not enough, the system will
adopt FIFO manner to cover the original error record.
The SYST:ERR? Command is used to read the first error code in the form of “error code, error
description”, so as to reduce the error number of error queue. For instance, if no error appears,
the system will return: 0, No error.
Besides, the :SYST:ERR Command is able to clear error queue.
0 ERR_NONE, No error
1 ERR_SAME_SETTING, Same setting
2 ERR_INVALID_INPUT, Invalid input
3 ERR_LIMIT_SETTING, Setting limit
4 ERR_CH_OFFSET_LIMIT, Channel offset limit
5 ERR_CH_SCALE_LIMIT, Channel scale limit
6 ERR_CH_PROBE_LIMIT, Channel probe limit
7 ERR_CH_FILTER_LIMIT, Channel filter limit
8 ERR_TIME_OFFSET_LIMIT, Timebase offset limit
9 ERR_TIME_SCALE_LIMIT, Timebase scale limit
10 ERR_TIME_DELAYED_OFFSET_LIMIT, Timebase of timedelay offset limit
11 ERR_TIME_DELAYED_SCALE_LIMIT, Timebase of timedelay scale limit
12 ERR_TRIG_LEVEL_LIMIT, Trigger level limit
13 ERR_MATH_VERT_OFFSET_LIMIT, Math vertical offset limit
14 ERR_MATH_VERT_SCALE_LIMIT, Math vertical scale limit
15 ERR_FFT_VERT_SCALE_LIMIT, FFT vertical offset limit
16 ERR_FFT_VERT_OFFSET_LIMIT, FFT vertical offset limit
17 ERR_FFT_HORIZ_SCALE_LIMIT, FFT horizontal scale limit
18 ERR_FFT_HORIZ_OFFSET_LIMIT, FFT horizontal offset limit
19 ERR_CUR_A_X_LIMIT, CursorA X-Axial limit
20 ERR_CUR_B_X_LIMIT, CursorB X-Axial limit
21 ERR_CUR_A_Y_LIMIT, CursorA Y-Axial limit
22 ERR_CUR_B_Y_LIMIT, CursorB Y-Axial limit
23 ERR_HOLDOFF_TIME_LIMIT, Holdoff time limit
24 ERR_INTENSITY_LIMIT, Intensity limit
25 ERR_PULSE_WIDTH_LIMIT, Pulse width limit
To Next Page
Loading...
Need help?
General
