Rigol DS1000B Series

Command Systems RIGOL
Programming Guide for DS1000B Series
2-13
1. :ACQuire:TYPE
Command Format:
:ACQuire:TYPE <type>
:ACQuire:TYPE?
Function:
The command sets the acquisition type. The <type>may be NORMal(common
sample), AVERage(average sample) or PEAKdetect(peak detection).
Returned Format:
The query returns Normal or AVERAGE, PEAKDETECT.
Example:
:ACQ:TYPE AVERage Set the acquisition type as average acquisition.
:ACQ:TYPE? Return AVERAGE.
2. :ACQuire:MODE
Command Format:
:ACQuire:MODE <mode>
:ACQuire:MODE?
Function:
The command sets the acquisition mode. The <mode> may be RTIMe (real time
sample) or ETIMe (equal time sample).
Returned Format:
The query returns RTIME or ETIME.
Example:
:ACQ:MODE ETIM Set the acquisition mode as equal time acquisition.
:ACQ:MODE? Return ETIME.
3. :ACQuire:AVERages
Command Format: