RIGOL
Copyright ©1998-2008 RIGOL Technologies, Inc.
User’s Guide for DS1000CA Series
6-3
Appendix C: Maintenance
General Care
Do not store or leave the instrument in where the LCD display will be exposed to
direct sunlight for long periods of time.
CAUTION: To avoid damage to the instrument or probes, do not expose
them to sprays, liquids, or solvents.
Cleaning
If this instrument requires cleaning, disconnect it from all power sources and clean it
with a mild detergent and water. Make sure the instrument is completely dry before
reconnecting it to a power source.
To clean the exterior surface, perform the following steps:
1. Remove loose dust on the outside of the instrument and probes with a lint- free
cloth. Take care to avoid scratching the clear plastic display filter.
2. Use a soft cloth dampened with water to clean the instrument.
NOTICE: To avoid damage to the surface of the instrument or probes, do not use
any abrasive or chemical cleaning agents.
!
To Next Page
Loading...
