Rigol DS2302A User Manual

Chapter 16 Remote Control RIGOL
MSO2000A/DS2000A User’s Guide
16-1
Chapter 16 Remote Control
MSO2000A/DS2000A oscilloscope can be controlled remotely mainly through the
following two methods.
User-defined programming
Users can program and control the oscilloscope by using the SCPI (Standard
Commands for Programmable Instruments) commands. For more information about
the commands and programming, refer to the
MSO2000A/DS2000A Programming
Guide
.
Use PC software
Users can use the PC software to send commands to remotely control the
oscilloscope. Ultra Sigma of RIGOL is recommended. You can acquire Ultra Sigma
from the resource CD in the standard accessories or download the latest version from
RIGOL official website (
www.rigol.com).
This oscilloscope can communicate with PC through USB, LAN or GPIB (with the
USB-GPIB interface converter provided by RIGOL) instrument bus. This chapter will
give a detailed introduction of how to use Ultra Sigma to control
MSO2000A/DS2000A remotely through various interfaces.
The contents of this chapter:
 Remote Control via USB
 Remote Control via LAN
 Remote Control via GPIB
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Rigol DS2302A Specifications

General

Brand	Rigol
Model	DS2302A
Category	Test Equipment
Language	English