Chapter 14 System Function Setting RIGOL
MSO4000/DS4000 User’s Guide 14-11
Self-test Information
Press Utility System SelfTestInfo to enter the self-test information interface.
You can view the result of the last self-test of the oscilloscope. The self-test
information contains the system voltage and outlet temperature.
Screen Saver
When the oscilloscope enters the idle state and holds for a certain period of time, the
screen saver program will be enabled.
Press Utility System Screen to open the screen saver setting menu. In this
menu,
Screensaver is “Default”; namely the icon RIGOL is used as the screen saver icon.
Press Time and turn the multi-function knob to select the desired screen saver
time (the default is “OFF”). You can also press Time continuously to switch the
current screen saver time. The screen saver time can be set to 1 min, 2 min, 5 min,
15 min, 30 min, 45 min, 60 min, 2 hour or 5 hour. When “OFF” is selected, the screen
saver program is disabled.
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30
To Next Page
Loading...
