Need help?Do you have a question about the Rigol DS1202/4B and is the answer not in the manual?
General| Bandwidth | 200 MHz |
|---|---|
| Input Coupling | DC, AC, GND |
| Vertical Resolution | 8-bit |
| Trigger Types | Edge, Pulse, Video, Slope, Alternate |
| Display | 7 inch TFT LCD, 800 x 480 pixels |
| Interfaces | USB Host, USB Device, LAN |
| Power Supply | 100-240 VAC, 45-440 Hz |
Overview of the oscilloscope's front panel layout, buttons, and knobs for operation.
Understanding and adjusting trigger controls, including mode, level, and source.
Detailed steps for configuring the vertical system, including channel settings like coupling and bandwidth.
Detailed steps for configuring the horizontal system, including time base and position controls.
Comprehensive guide to setting up the trigger system, including modes, sources, and conditions.
Configuring acquisition modes, sampling rates, and interpolation for optimal signal capture.
Setting up automatic measurements for voltage, time, and quick measurement parameters.
Using manual, track, and auto modes for precise waveform measurements with cursors.
Demonstrating basic signal display and automatic measurements of frequency and amplitude.
Technical details on sampling modes, rates, and averaging capabilities.
Specifications related to input coupling, impedance, probe attenuation, and voltage limits.
Technical details on sample rate range, waveform interpolation, record length, and scan speed.
Technical details on A/D converter, Volts/div range, analog bandwidth, and DC gain accuracy.
Specifications for trigger sensitivity, level range, accuracy, holdoff, and trigger types.
To Next Page
