RIGOL           
© 2008 RIGOL Technologies, Inc.       
  User’s Guide for DS1000B Series 
Chapter 6 : Appendixes 
 
Appendix A: Accessories 
z  Probe×4 (1.5m), 1:1, (10:1) Passive Probes 
When the switch of probe is toggled to 1X attenuation setting, the probe has 
6MHz bandwidth, according with 150V CAT II. 
When the switch of probe is set to 10X attenuation setting ,the probe’s 
bandwidth equals to the upper limit of the oscilloscope, according with 300V 
CAT II. 
z  A Power Cord that fits the standard of destination country. 
z  A USB Cable 
z  A Quick Guide 
z  A CD-ROM (includingljUser’s GuideNJan application software) 
z  A Warranty Card 
 
Optional accessories: 
z  BNC Cable        
z  RS232 Cable       
z  DS1000B special convenient soft bag 
 
All accessories (standard and optional) are available by contacting your 
local RIGOL office.