Tip
âš« Only 1 option license file of one instrument is allowed to be stored in the
same USB storage device, but the USB storage device can store the option
license file of several different instruments. You are not allowed to modify
the licensed filename.
âš« During the installation process, you are not allowed to power off the
instrument or pull out the USB storage device.
âš« Sending the SCPI commands to install options is supported. For details, refer
to the :SYSTem:OPTion:INSTall command. Installing options by inputting
the license code manually is not supported.
To Next Page
Loading...
Need help?
General
