ring Alarm Pro User Manual

Install steps:
✓
1. Follow the steps in the Ring app.
When the app prompts you, pull out
the battery tab to power it on.
✓
//2
2. In the Ring app, select the correct Sensor
X
placement option to avoid false alarms.
- ✓
Always choose the Main Door setting to get
;
Entry and Exit Delays, required for Contact
Sensors on the doors you use most often.
3. Choose where you'd like to install
your Sensor and magnet. Line them
up with no more than , ,, between
them. If installing it on a door, choose
a side without hinges. (See images)
0
4. Clean the wall or window surface, then
1''
peel the backing from the attached tape
max
and press the Sensor and magnet into
0)
C
·c
place. Press and hold for 20 seconds.
Need Contact Sensor help?
Visit ring .co m/alarm-pro
for an installation video.
17

ring Alarm Pro Specifications

General

Base Station Connectivity	Wi-Fi, Ethernet
Battery Backup	Yes, up to 24 hours
Works with Alexa	Yes
Z-Wave	Yes
Zigbee	No
Local Processing	Yes
Cellular Backup	Yes, with Ring Protect Pro subscription
Eero Wi-Fi 6 Router	Built-in
Operating Temperature	32°F to 104°F (0°C to 40°C)
Professional Monitoring	Available with Ring Protect Pro subscription
Power Source	AC Adapter
Storage	Cloud storage available with subscription
Security Features	Secure Boot