ring Alarm Pro User Manual

& Safety Information
How to mount your Ring Alarm Pro on a wall (optional)
You can mount your Ring Alarm Pro on a wall using two wall anchors, two screws, and the
mounting slots located on the unit. It is only suitable for mounting at heights~ 2m. If you
plan to use Ring Power Packs with your Alarm Pro, wall mounting is not supported.
Note: Ring Alarm Pro is for indoor use only.
Before you begin, choose a wall mounting spot that is-; 2m high, free of obstruction on all sides,
and where the cables can reach the outlet and the modem. The wall can be made of cement,
wood, or drywall. Make sure you can access the cables easily. You will also need the following items:
• Two wall anchors for #8 x 1-inch screws
• Two #8 x 1-inch pan head screws
Installation:
1. Drill two holes with a 3/16" wood or masonry bit (as needed) for the anchors.
2. These holes should be 58mm apart to fit the slots on the back of the Alarm Pro.
3. Insert the anchors into the wall, then insert the screws.
4. Mount the Ring Alarm Pro.
See illustrations for details.

ring Alarm Pro Specifications

General

Base Station Connectivity	Wi-Fi, Ethernet
Battery Backup	Yes, up to 24 hours
Works with Alexa	Yes
Z-Wave	Yes
Zigbee	No
Local Processing	Yes
Cellular Backup	Yes, with Ring Protect Pro subscription
Eero Wi-Fi 6 Router	Built-in
Operating Temperature	32°F to 104°F (0°C to 40°C)
Professional Monitoring	Available with Ring Protect Pro subscription
Power Source	AC Adapter
Storage	Cloud storage available with subscription
Security Features	Secure Boot