ring Alarm Pro User Manual

Understanding Entry & Exit Delays
Exit Delay gives you a short period of time
to leave once you've armed your system.
After you arm, you'll hear a series of chirps
reminding you that there are only a few
seconds to exit and close the door. When your
Exit Delay ends, your alarm system 1s in an
armed mode. Opening your door will trigger
the Entry Delay to begin counting down.
Entry Delay gives you a short time to disarm
your alarm system after you open the
door. You'll hear chirp sounds during the
delay, and when the delay ends, if you don't
disarm, your Ring Alarm siren will sound.
To use Entry and Exit Delays, open the Ring
app and check that the Contact Sensor
placement is set to Main Door. You can
customize each delay, choosing between
0 seconds (no delay) and 180 seconds
(3 minutes). Just make sure you give yourself
enough time to arm and disarm your alarm.
19

ring Alarm Pro Specifications

General

Base Station Connectivity	Wi-Fi, Ethernet
Battery Backup	Yes, up to 24 hours
Works with Alexa	Yes
Z-Wave	Yes
Zigbee	No
Local Processing	Yes
Cellular Backup	Yes, with Ring Protect Pro subscription
Eero Wi-Fi 6 Router	Built-in
Operating Temperature	32°F to 104°F (0°C to 40°C)
Professional Monitoring	Available with Ring Protect Pro subscription
Power Source	AC Adapter
Storage	Cloud storage available with subscription
Security Features	Secure Boot