ring Alarm Pro - Page 21

How do you reduce false alarms?
• The Detector should not face a heat
source such as a stove, fireplace
or windows with direct sun.
• Never install a Motion Detector facing stairs.
• Make sure your pets can't get close to the
Motion Detector by climbing on furniture .
• Use the app to adjust pet sensitivity settings.
• Keep the default settings. Only arm
the Motion Detector in Away Mode.
Install steps:
1. Follow the steps in the Ring app. To connect
your Motion Detector, pull the battery tab.
2. Using the app, specify where you will
place your Motion Detector; then give it
a unique name and assign it to a room.
3. If you're mounting the Motion Detector
on a wall, clean the wall, then peel the
backing off the 2 pieces of tape located
on the back. If mounting it in a corner, peel
the backing off the tape on each of the
corners. Press and hold for 20 seconds.
11 11
--
Motion Detector on a wall
11 11
- ·-
Motion Detector in a corner
21