ring Alarm Pro User Manual

Setup and install steps:
1. Follow the directions in the app.
When prompted, plug the Keypad
into an outlet with the included
USB cable and wall adapter.
2. Give your Keypad a unique name and
add it to a room. Don't forget, you
must create a personal access code
to arm and disarm your Alarm.
3. The Keypad can be mounted flush on a
wall or placed on a table, and can be left
plugged in or run on its internal battery.
Note: If using the Keypad unplugged,
charge it fully before first use.
To place the Keypad on a table, slide the
bracket off of the Keypad, then flip the bracket
over, and slide it back on to elevate the Keypad.
To install the Keypad on a wall, slide the
bracket off the Keypad. Place the mounting
bracket on the wall, then use the wall anchors
and screws from your kit to fasten the bracket to
the wall. (If using anchors, you should pre-drill
holes.) Slide the Keypad onto the bracket.
II
23

ring Alarm Pro Specifications

General

Base Station Connectivity	Wi-Fi, Ethernet
Battery Backup	Yes, up to 24 hours
Works with Alexa	Yes
Z-Wave	Yes
Zigbee	No
Local Processing	Yes
Cellular Backup	Yes, with Ring Protect Pro subscription
Eero Wi-Fi 6 Router	Built-in
Operating Temperature	32°F to 104°F (0°C to 40°C)
Professional Monitoring	Available with Ring Protect Pro subscription
Power Source	AC Adapter
Storage	Cloud storage available with subscription
Security Features	Secure Boot