WARNING: Risk of electrical shock
• Disconnect power at the fuse or circuit breaker
before installing.
• Verify that the supply voltage is correct. Connect
fixture to a 100 VAC~240 VAC 50/60 Hz power
source.
• Properly ground fixture.
• Always follow code standards when installing wired
connections.
CAUTION: Risk of fire
• Do not install near combustible or flamable surfaces
NOTICE
• Do not connect this light fixture to a dimmer switch
or timer.
Step 1– Shut power o
at the breaker
If you don’t know where your
breaker is or how to turn o
power to your floodlight circuit,
hire a licensed electrician.
1110
To Next Page
Loading...
