WARNING: Risk of
electrical shock
• Installation and wiring
must be performed by a
licensed electrician.
• Shut o power at
the fusebox before
installing.
• Verify that the supply voltage is correct. Connect
fixture to a 100 VAC~240 VAC 50/60 Hz power
source.
• Properly ground fixture.
• Always follow code standards when installing wired
connections.
CAUTION: Risk of fire
• Do not install near combustible or flamable surfaces.
NOTICE
• Do not connect this light fixture to a dimmer switch
or timer.
• Floodlight Cam must be installed on a wall and on a
UL listed junction box.
11
To Next Page
Loading...
