ring Stick Up Cam Battery User Manual

How to install Stick Up Cam
on a wall:
Remove the base.
Unscrew it using a Phillips-head screwdriver (not included).
Re-attach the base.
Screw it into the back of your Stick Up Cam
with the “UP” arrow on the bracket pointing
upward.
How to use Stick Up Cam
on a table or shelf:
It’s all ready, already!
Insert the charged battery, then place it at your chosen location.
Your Stick Up Cam is now ready to protect you.
Once you’re done, check out the live video in the Ring app to make sure
you have the view you want.
If you’d like a downward camera angle...
Swivel the base around so that the long side faces the front, then tilt your
Stick Up Cam so it points downward.
1
12
3
98
02_Stick_Up_Cam_Battery_MANUAL_BETA.indd 9 6/6/19 2:47 PM

ring Stick Up Cam Battery Specifications

General

Type	IP security camera
Remote viewing	Yes
Placement supported	Indoor & outdoor
Connectivity technology	Wireless
Ethernet LAN	-
Wi-Fi standards	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Built-in HDD	No
Form factor	Box
Mounting type	Ceiling/Wall/Desk
Product color	White
Minimum illumination	- lx
Power source type	Battery
Operating temperature (T-T)	-20.5 - 48.5 °C
Total megapixels	- MP
Maximum resolution	- pixels
Supported video modes	1080p
Cables included	Micro-USB
Number of cameras	1
Audio system	2-way
Mobile operating systems supported	Android, iOS

Weight and Dimensions

Width	60 mm
Height	97 mm