ring Stick Up Cam Pro - Page 12

Place the mounting plate on the ceiling
with the UP arrow pointing in the opposite
direction from where your camera will face.
If installing on drywall, screw the plate directly
into the ceiling.
If installing on a masonry surface, mark four
screw holes using the plate as a guide.
Drill pilot holes using a 1/4" drill bit. Insert
the included wall anchors, then drive the four
mounting screws through the mounting plate
into the wall anchors.
WARNING!
Only use the included mounting screws
when securing the mounting plate.
CAUTION!
DO NOT drill into your home's
electrical wiring.
12