ring Stick Up Cam Pro - Page 7

Place the mounting plate on the wall with the
UP arrow pointing up.
If installing on a wood surface, screw the plate
directly into the wall.
If installing on a masonry surface, mark four
screw holes using the plate as a guide.
Drill pilot holes using a 1/4" drill bit. Insert
the included wall anchors, then drive the four
mounting screws through the mounting plate
into the wall anchors.
R\. WARNING!
l-1.J Only use the included mounting screws
when securing the mounting plate .
/;).,_ CAUTION!
l1..J DO NOT drill into your home's
electrical wiring.
7