ring Stick Up Cam Wired User Manual

Let’s get your Stick Up Cam ready.
First, slide off the bottom cover.
Do not reattach this cover until setup is complete!
Powering your Stick Up Cam
You can power Stick Up Cam in one of two ways: Plug it into
a socket (with USB), or power it with the included Ring PoE
Adapter, which supplies Power over Ethernet.
If you’re installing Stick Up Cam indoors, you can use either
power supply. For outdoors, use the PoE Adapter.
4

ring Stick Up Cam Wired Specifications

General

Type	IP security camera
Placement supported	Indoor & outdoor
Connectivity technology	Wired & Wireless
Bluetooth	-
Ethernet LAN	Yes
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN (RJ-45) ports	1
Power source type	AC, PoE
Total megapixels	- MP
Maximum resolution	- pixels
Supported video modes	1080p
Cables included	LAN (RJ-45), Micro-USB
Minimum illumination	- lx
Audio system	2-way
Operating temperature (T-T)	-20.5 - 48.5 °C
Form factor	Box
Mounting type	Ceiling/Wall/Desk
Product color	Black
Mobile operating systems supported	Android, iOS
Harmonized System (HS) code	85258900

Weight and Dimensions

Width	60 mm
Height	97 mm