Rinnai infinity 18 - Standard Temperature Controller Operation

- 9 -
STANDARD TEMPERATURE CONTROLLER
Standard Kitchen Temperature Controller (MC-33-3A)
Temperature Controllers are not required to operate the unit, they are a feature that provides control
over water temperature. Rinnai Infinity water heaters can be operated with 1, 2, 3 or no Temperature
Controllers.
* This Temperature Controller is also suitable for installation in laundry areas.
Use this control in installations where only one controller is required.
H
O
T
T
E
R
O
N
/
O
F
F
C
O
O
L
E
R
APPROX WATER TEMP
TEMPERATURE
CONTROL
MC - 33 - 3A
ON IN USE
o
C
DIGITAL
MONITOR
Indicates the temperature
selected. Error message
flashes in the event of a
fault.
ON INDICATOR
Indicates which temperature
controller is in control of
adjusting water temperature.
OPERATION
INDICATOR
Indicates that a hot water tap
is open (in any location).
MC-33-3A
Identifies this remote
control as for use in the
Kitchen.*
THERMOSTAT
To alter the temperature of
the water.
ON / OFF
Power switch to operate.
.