Rinnai infinity 18 - Operation with Standard Temperature Controllers; Using the Infinity with 1 Standard Temperature Controller; Adjusting Temperature

- 11 -
OPERATION WITH STANDARD TEMPERATURE CONTROLLERS
Using the Infinity with 1 Standard Temperature Controller
Press the ON/OFF button on the Temperature Controller.
The yellow ON indicator will glow on the
Temperature Controller. This indicates that the hot
water unit is ready to supply hot water when a tap
is open.
To operate the hot water unit, simply turn any hot
water tap on. This will automatically light the
burner providing hot water. The red IN USE
indicator will glow on the Temperature Controller.
Adjusting Temperature
Simply press the HOTTER or COOLER
button until the required temperature is displayed
on the Digital Monitor.
O
N
/
O
F
F
ON
HOT
COLD
IN USE
H
O
T
T
E
R
C
O
O
L
E
R
CHECK WATER TEMPERATURE BEFORE ENTERING SHOWER OR BATH.
Always test the water temperature in bath before a child gets in. This is best done by the
parent placing their elbow in the water .
NOTE
When any hot water tap is open, temperature cannot be adjusted except between 37°C
and 43°C.
NOTE