Rinnai Infinity 26 Touch - Altitude Setting REU-AM3237 ONLY; Altitude Setting REU-VCM ONLY

Rinnai 18 HW_CF OIM
Altitude Setting REU-VCM ONLY
IMPORTANT
REU-VCM models are suitable for installation locations higher than 1000 metres above sea level
such as alpine areas. To ensure proper appliance operation the installer MUST select one of the
two available altitude ranges for the appliance these are:
'DEFAULT' suitable for installation locations that are from 0 to 900 metres
above sea level.
'HIGH' suitable for installation locations that are from 901 to 1800 metres
above sea level, as would be typical of installations located in alpine areas.
Refer to "Commissioning Instructions" located inside the appliance front
cover for details.
OFF ON
DipSW1
6
OFF ON
DipSW2
6
Default
OFF ON
DipSW1
6
OFF ON
DipSW2
6
High
Altitude Setting REU-AM3237 ONLY
IMPORTANT
REU-AM3237 models are suitable for installation locations higher than 1000 metres above sea
level such as alpine areas. To ensure proper appliance operation the installer MUST select one of
the two available altitude ranges for the appliance these are:
'DEFAULT' suitable for installation locations that are from 0 to 900 metres
above sea level.
'HIGH' suitable for installation locations that are from 901 to 1800 metres
above sea level, as would be typical of installations located in alpine areas.
Refer to "Commissioning Instructions" located inside the appliance front
cover for details.
Default
Dipswitch
High
1
OFF ON
2
3
4
1
OFF ON
2
3
4
GENERAL INSTALLATION INFORMATION