Rinnai MC 70 2A User Manual

- 18 -
DELUXE TEMPERATURE CONTROLLERS
Setting the Sound Volume
The ‘Sound Vol.’ Button located behind the flip panel is not used when one Kitchen Controller
is connected.
Using Hot Water
The hot water delivery temperature can be controlled
from the Kitchen Controller (MC-70-2A).
Ensure the system is switched ON. If not, press
the ‘ON/OFF’ button behind the flip panel once.
The ‘Transfer’ button will light up.
Select the desired temperature using the ‘Hot
water temp.’ buttons. The selected temperature
will be displayed on the controller monitor.
Open the hot water tap. The hot water unit will
activate and the red combustion symbol will light
up on the monitor.
Clock Hour Min.
Vol.
C
AM
Hot water
temp.
00 00
ON/OFF
MC -70 -1A
Transfer
Sound
Cooler Hotter
C
AM
Transf er
C
AM
HOT
COLD
CHECK WATER TEMPERATURE BEFORE USE.
A parent should always check the temperature before a child is placed in contact with hot water
.
CAUTION
Consumer safeguards: With the hot water tap open and a temperature of 43°C or higher selected, if the
temperature is decreased to below 43ºC, and then raised again the maximum available temperature
will be 43°C
,
in addition tem
p
erature ‘
p
riorit
y
’ cannot be transferred between controllers.
NOTE
- 14 -

Rinnai MC 70 2A Specifications

General

Brand	Rinnai
Model	MC 70 2A
Category	Temperature Controller
Language	English