Rinnai MC 70 2A User Manual

- 299 -
OPERATION WITH DELUXE TEMPERATURE CONTROLLERS
Using 2 Deluxe Controllers
When 2 Deluxe Temperature Controllers are used,
they must be models MC-70-2A (Kitchen) and
BC-70-2A (Bathroom).
Switching the System ON
The hot water system and both controllers can be
switched on and off from either controllers by
pressing the ‘ON/OFF’ button as shown. When the
system is turned on, the monitor will be lit. During
normal operation the system is left on.
Setting the Clock
The clock is of the 12 hour AM/PM type and is set on the
Kitchen Controller (MC-70-2A).
Press the ‘Clock’ button. The digital monitor will flash
AM 12:00.
Set the time using the ‘Hour’ and ‘Min.’ buttons. The
time is displayed on the monitor as the buttons are
pressed. The numbers on the monitor will continuously
change if you keep the buttons depressed. When you get
close to the desired time, press the button intermittently.
Press the ‘Clock’ button again to activate the clock.
Clock Hour Min.
Vol .
C
AM
Hot wa ter
tem p.
00 00
ON/OFF
MC-70 -1A
Tran sfer
Sound
Cooler
Hotter
Clock Hour
Min.
Vol.
C
AM
00 00
ON/OFF
Sound
Clock Hour
Min.
Vol.
C
AM
00 00
ON/OFF
Sound
Clock Hour
Min.
Vol.
C
AM
00 00
ON/OFF
Sound
The time displayed on the Kitchen Controller is automatically displayed on all Bathroom
Controller(s) when the Bathroom Controller(s) are ON. If the controllers are OFF, the time is
onl
y
dis
p
la
y
ed on the Kitchen Controller. The clock ma
y
need to be reset after a
p
ower failure.
NOTE
Clock Hour Mi n.
Vol .
AM
Hot wa ter
tem p.
00 00
ON/OFF
MC-70 -1A
Tran sfer
Sound
Cooler Hotter
- 15 -

Rinnai MC 70 2A Specifications

General

Brand	Rinnai
Model	MC 70 2A
Category	Temperature Controller
Language	English