Rinnai MC 70 2A User Manual

- 24 -
OPERATION WITH DELUXE TEMPERATURE CONTROLLERS
Using 2 Deluxe Controllers and 1 Universal Controller
When 2 Deluxe Temperature Controllers are used, they must be one MC-70-2A (Kitchen), one
BC-70-2A and one MC-91-1A (Bathrooms 1 & 2)
Cloc k Hour Mi n.
Vol .
AM
Ho t wa ter
tem p.
00 00
ON/OFF
MC-70-1A
Transfer
Sound
Cooler
Hotter
Switching the System On
The hot water system can be switched on and off from any controller by pressing the ‘ON/OFF’
button as shown. When the system is turned on, the monitors will be lit. During normal operation
the system is left on.
Setting the clock
See page 13 for details on setting the clock.
Setting the Sound Volume
See page 16 for details on setting the sound volume.
Using Hot Water
The hot water delivery temperature can be controlled from either the Kitchen Controller
(MC-70-2A), Bathroom Controllers (BC-70-2A ) or Universal Controller (MC-91-1A). See pages
16 to 17 for details on setting the hot water delivery temperature for the Kitchen and Bathroom
Controllers.
Shower Saver / Bath Fill Function
See pages 17 to 19 for details on the Shower Saver / Bath fill function. With two or more Bathroom
Controllers fitted (one in each bathroom) only one bath can be filled at a time.
CHECK WATER TEMPERATURE BEFORE USE.
A parent should always check the temperature before a child is placed in contact with hot water
.
CAUTION
Consumer safeguards: With the hot water tap open and a temperature of 43°C or higher selected, if the
temperature is decreased to below 43ºC, and then raised again the maximum available temperature
will be 43°C
,
in addition tem
p
erature ‘
p
riorit
y
’ cannot be transferred between controllers.
NOTE
- 20 -

Rinnai MC 70 2A Specifications

General

Brand	Rinnai
Model	MC 70 2A
Category	Temperature Controller
Language	English