Rinnai 18 ES_FDT_OIM
INSTALLATION GENERAL
PRODUCT SPECIFICATIONS
DIMENSIONS
Model RHFE-559FDT RHFE-1005FDT
Dimensions
(mm)
Height 582 670
Width 760 930
Depth 257 330
Weight (kg) 26 42
Gas Control Valve Rinnai Electronic Modulating Gas Valve
Burner Fabricated Stainless Steel - Bunsen Burner Type
Injector (mm)
Natural Gas 4x 1.25 Ø 4x 1.50 Ø, 1x 0.45 Ø
Propane Gas 4x 0.82 Ø 4x 1.00 Ø, 1x 0.30 Ø
Gas Inlet Thread R ½’ Male (15mm)
Flue System
Fan assisted, twin chamber Co-Axial Flue System, provides air for
combustion to the appliance and allows expulsion of combustion products
to atmosphere. Results in ‘room sealed’ appliance.
Ignition Direct continuous spark electronic ignition
Electrical
Supply
230V / 240V 50Hz earthed 10 Amp, supply lead and 3 pin plug
Replace ONLY with Rinnai genuine part
Standby Power Consumption <1W
Convection Fan Cross Flow Type fan Centrifugal Drum Type fan
Temperature Range 16°C to 26°C in 1°C increments
The manufacturer reserves the right to change or modify specifications without notice.
For other appliance specifications refer to appliance data plate.
To Next Page
Loading...
Need help?
General