Rinnai RPC26MC User Manual

LOCATION
This portable air conditioner must be installed on a at and
dry surface. A minimum clearance of 500mm from walls or
other appliances is required as well as easy access to a
power point (GPO).
The air outlets and the ducting system must not be obstructed.
IMPORTANT
Theapplianceisttedwitha1.2mexiblecord
220-240V50Hz10A.
Themaximumductextensionis1.8mintotal.
Bothfactorsaretobetakenintoaccountwhen
determiningthelocationthattheappliancewill
beoperatedin.
DUCT ASSEMBLY
1� Place the Duct to Unit Adaptor (17) over the Exhaust Outlet (5), push it downwards to ensure it engages the
Exhaust Outlet tabs.
2� Screw one end of the Exhaust Duct (16) into the Duct to Unit Adaptor (17).
3� On the other end of the Exhaust Duct (16) x the Window Exhaust Duct Adaptor (15).
1
2
3
4
9
6
5
7
8
11
12
13
10
Front
Back
15
17 16
18
14
500mm
500mm
500mm
500mm
INSTALLATION
Rinnai 19 Portable Room AC OIM

Rinnai RPC26MC Specifications

General

Brand	Rinnai
Model	RPC26MC
Category	Air Conditioner
Language	English