42 Rinnai CVent
A14 Application Manufacturer’s Information
The manufacturer’s identification information as displayed below must be filled out and kept with the system chimney.
The following points must be filled out below by the installer after release of the system:
Installation date of the system chimney:
Number of entries (appliances)
Nominal diameter of the selected system chimney:
Constructor of the chimney with full name ((Stamp) legible and with signature):
OEM Manufacturer identification
Ubbink/Centrotherm Centrotec Sustainable AG
Verhuellweg 9
6984AA Doesburg,
The Netherlands
Mail: rolux@ubbink.nl
(YYYY/MM/DD)
(Name)
(Street address)
(Signature)
To Next Page
Loading...
