Rinnai V Model Series User Manual

V53De Manual 17
Technical Data
Specicaons
* Minimum ow may vary slightly depending on the temperature seng and the inlet water temperature.
Minimum acvaon ow is 0.6 GPM (1.5 L/min).
Our products are connually being updated and improved; therefore, specicaons are subject to change without prior noce.
The maximum inlet gas pressure must not exceed the value specied by the manufacturer. The minimum value listed is for the purpose of input
adjustment.
V53De
Minimum Gas Consumpon Btu/h 15,500 (LP & NG Both)
Maximum Gas Consumpon Btu/h 120,000
Hot water capacity (Min - Max) * 0.4 - 5.3 GPM (1.5 - 20.0 L/min)
Temperature Sengs (without temperature controller) 120° F (49° C), default or 140° F (60° C)
Temperature Controller Default Seng 115° F (46° C)
Maximum Temp Seng (residenal)
see Temperature Ranges for more informaon
140° F (60° C)
Minimum Temperature Seng 115° F (46° C)
Weight 29.7 lb. (13.5 kg)
Noise level 54 dB
Electrical Consumpon
Normal 50W
Standby 2 W
An-frost Protecon 64W
Max Current 1.2A
Fuse 5A
By-Pass Control Fixed
Gas Supply Pressure
Natural Gas 4.5 - 10.5 inch W.C.
Propane 8.0 - 13.5 inch W.C.
Type of Appliance Temperature controlled connuous ow gas hot water system.
Connecons
Gas Supply: 3/4" MNPT, Cold Water Inlet: 3/4" MNPT, Hot Water Outlet: 3/4"
MNPT
Ignion System Direct Electronic Ignion
Electric Connecons Appliance: AC 120 Volts, 60Hz. Remote Control: DC 12 Volts (Digital)
Water Temperature Control Simulaon Feedforward and Feedback.
Water Supply Pressure
Minimum Water Pressure: 20 PSI (Recommended 30-80 PSI for maximum
performance)
Maximum Water Supply Pressure 150 PSI
Remote Control Cable Non-Polarized Two Core Cable (Minimum 22 AWG)
Cered for installaon in manufactured (mobile) homes Yes
NOx
Complies with South Coast Air Quality Management District 40 ng/J
NOx emission levels

Rinnai V Model Series Specifications

General

Brand	Rinnai
Model	V Model Series
Category	Water Heater
Language	English