9
Chapter 1
BACK / BOTTOM PANEL ASSEMBLYMORPHEUS
13
Secure the structure
Once you have secured the two sides, you should have an L-shaped section
ready for configuration.
screw them from the outside in
1
2
3
4
5
6
- Place and tighten six (1, 2, 3, 4, 5 and 6) structure screws,on each side to
secure the adjustable top, expansion bracket and the back panel body.
- Adjust the height of the adjustable top in order align the structure screw
holes of the adjustable top and the back panel body.
To Next Page