Before You Begin 7
CONVERTIBLE PC CASEMORPHEUS
Start by taking the entire content out of the box, sort them out by section,
take out the quick start mouse mat and use it as general guide and
building surface.
Note: Handle all components with care, should you need any assistance go to www.riotoro.com/support
REQUIREMENTS
In order to assemble Morpheus to the desired form factor
(either mini or mid tower) you will need:
1. A flat working area (e.g. desk or table)
with sufficient space
2. A magnetic Phillips screw driver
This means you need to have the Phillips screw driver
available in order to complete this assembly and the
type of screw you need.
9
To Next Page
Loading...