Rish DELTA VAF NX User Manual

The second digit entered,
prompt for third digit
(Blinking digit denotes
that value will be
changing).Use the “ ” key
to scroll the value of the third
digit.
Entered value for third digit.
E
M K W h
V
A
K
L2 M L3 W Ø
r h
K
V
M
L1
L2
DM
A h
L3 L1 Hz P F
SY
Press the “ ” key to advance
to next Screen Energizing delay
time” ( 3.2.4.1.1.1.5 ).
18
E
A
This screen allows the user
to set Energizing Delay Time
in seconds for Relay Limit
assigned parameters
Pressing ” ” key advances
to De-energizing delay
screen.
Pressing the “ ” key will enter the Energizing Delay edit
mode and pressing the “ ”key scroll the value
through 1 to 10.
.
Pressing the “ ” key will re-enter the Energizing
delay edit mode.
Pressing “ ” key set displayed value & “ ” key will
advance to De-energizing Delay Time screen (See
Section 3.2.4.1.1.1.6).
3.2.4.1.1.1.6 De-Energizing Delay
Time
This screen allows the user to set De-Energizing
Delay time in seconds for Relay Limit Assigned
Parameters .
Pressing “ ” key accepts the
present value and “ ” key
advance to Configuration of
output. (See section 3.2.4.1)
Pressing the “ ” key will
enter the “De-Energizing
Delay” Edit mode and scroll
Pressing “ ” key set displayed value & will advance
to Configuration of output. (See section 3.2.4.1)
the “Value” through 1 to10.
.
V
M K W h
V
A
r h
K
V
L1
L2
DM
A h
SY
4 Run Hour .
This screen shows the total
no. of hours the load was
connected. Even if the
auxiliary supply is interrupted
count of Run hour will be
maintained in internal
memory & displayed in the
format “hours.min”.
V
M K W h
V
A
K
L2 M L3 W Ø
r h
K
V
M
L1
L2
DM
L3
A h
L3 L1 Hz P F
SY
For example if displayed count is 105000.10 r-H it
indicates 105000 hours & 10 minutes.
After 999999.59 run hours display will restart from
zero. To reset run hour manually see Section
Resetting Parameter 3.2.3.1
5 Hour . On
This screen shows the total
no. of hours the auxiliary
supply was “ON”. Even if the
Auxiliary supply is interrupted
count of On hour will be
maintained in internal
memory & displayed in the
format “hours. min”.
V
M
L1
L2
DM
L3
A h
SY
For example if displayed count is 005000.10 On-H it
indicates 005000 hours and 10 minutes.
After 999999.59 On hours display will restart from
zero. To reset On hour manually see Section
Resetting Parameter 3.2.3.1
3.2.4.1.1.1.5 Energizing Delay Time

Rish DELTA VAF NX Specifications

General

Brand	Rish
Model	DELTA VAF NX
Category	Measuring Instruments
Language	English