RPR-4000
Operations manual
REV 8-21 6
Important Safety Instructions
To reduce the risk of fire, electric shock, or injury to persons,
basic safety precautions should be followed:
1. Read and understand this manual before attempting to
operate the RPR-4000.
2. Do not defeat power cord safety ground feature. Always
plug the RPR-4000 into a grounded AC power outlet.
3. Replace fuses with only that exact style and rating as
listed on the rear panel
4. Keep liquids at a safe distance from the RPR-4000 which
has an IP rating of 20
5. Do not use product in any manner inconsistent with
manufacturer’s specifications.
6. The RPR-4000 produces high voltage RF pulses and is
intended for use by qualified personnel only.
7. There are no user serviceable parts inside. Return the
product to Ritec or an authorized Ritec representative
for service and repair.
For technical assistance and service contact either RITEC or your RITEC
representative.
To Next Page
Loading...