To Next Page
B
bbaileySep 2, 2025
What to do if my Rivacold Air Conditioner has a dirty filter on oil return?
- MmalonejasonSep 2, 2025
If the filter on oil return is dirty in your Rivacold Air Conditioner, clean or replace it.
What to do if my Rivacold Air Conditioner has a dirty filter on oil return?
If the filter on oil return is dirty in your Rivacold Air Conditioner, clean or replace it.
What to do if my Rivacold Air Conditioner has an imprecise thermometer?
If your Rivacold Air Conditioner has an imprecise thermometer, calibrate or replace it.
What to do if my Rivacold Air Conditioner has clogged discharge pipes?
If your Rivacold Air Conditioner has clogged discharge pipes, clean the clogged discharge pipes.
What to do if my Rivacold Air Conditioner has a gauge not set?
If the gauge is not set in your Rivacold Air Conditioner, set the gauge correctly.
What to do if my Rivacold Air Conditioner has expansion valve capacity too low?
If the expansion valve capacity is too low in your Rivacold Air Conditioner, replace or adjust the expansion valve to increase capacity.
What to do if my Rivacold Air Conditioner has excess oil in the circuit?
If there is excess oil in the circuit of your Rivacold Air Conditioner, remove excess oil from the circuit.
What to do if my Rivacold Air Conditioner has an expansion valve failure?
If your Rivacold Air Conditioner's expansion valve has failed, replace it.
What to do if my Rivacold Air Conditioner has clogged liquid pipes?
If the liquid pipes in your Rivacold Air Conditioner are clogged, clean them.
What to do if my Rivacold Air Conditioner has ice formed on expansion valve needle?
If ice has formed on the expansion valve needle of your Rivacold Air Conditioner, remove the ice.
What to do if my Rivacold Air Conditioner has a clogged suction filter?
If your Rivacold Air Conditioner's suction filter is clogged, you should clean or replace it.
Details lifting, fixing units, pipe/cable passage, and clearance requirements.
Refers to drawings and documents for evaporator installation.
Covers refrigerating connections, suction line, oil return, and vacuum procedures.
Details the process of charging the system with refrigerant and checking for leaks.
Covers pressure switches, relief valves, and electrical connection requirements.
General| Refrigerant | R410A |
|---|---|
| Power Supply | 220-240V/50Hz/1Ph |
| Cooling Capacity | 2.6 kW |
| Air Flow | 500 m³/h |
| Noise Level (Indoor) | 38 dB(A) |
